Best Concrete Sealers, Concrete Floor Sealers, Decorative Concrete Sealers from SurfKoat

 Check out our Concrete Sealers, Concrete Floor Sealers, & Decorative Concrete Sealers

Concrete Sealers

Check out our Concrete Sealers, Concrete Floor Sealers, & Decorative Concrete Sealers

VIEW ALL CONCRETE SEALER PRODUCTS HERE

Helpful Tips:
Prepping your concrete surface before applying the concrete sealer. 

 Decorative Concrete Sealers

Concrete surface must be clean and free of all contaminants and water. Do not apply if rain is forecast within 24 hours. If moisture is present or if the surface is not clean and free of all contaminants, the sealer may have white spots and have premature delamination and failure.May be applied when damp (not “wet”) to freshly placed concrete surfaces as a cure & seal.

Application of the Concrete Sealer.
Apply using an 3/8” long nap roller cover using long even uniform strokes. An airless sprayer containing a .519 tip size may be used as well. Thick or puddle areas may prevent the solvent from evaporating and may be susceptible to moisture intrusion which may cause milky white spots. Applying too thin may cause sealer to prematurely delaminate, flake or wear away. Allow sealer to dry for 24 hours for light traffic and at least 48 hours for heavy traffic. If applying two coats, wait approximately 4 – 6 hours between coats.


Tags: 
Concrete Sealers, Concrete Floor Sealers, Decorative Concrete Sealers